Search
Confirm
Cancel

Products

Product Details

1/1
Number of views:
1000

VL-6i

Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
Tel:+1-831-256-8991 kevin@icuttoolscorp.com Enquiry
Quantity
-
+
Stock:
0
1
Product description

Product Name : VL-6i

 

Product Character

 

Specially designed for high speed machining meet the requirment of production

 

  1. Major structural components of the ECOM machine utilize MEEHANITE cast iron to provide maximum stability.  All structural components are tempered and stress relieved. Major structural components are analyzed and designed using advanced finite element analysis (FEM). This allows exceptional structural rigidity, high speed machining resistance and a low center of gravity.
  2. High precision ball screws on three axes are direct drive, perload, no backlash.
  3. All high precision ball screws are assembled modularly. The resulting parallelism and verticality of each ball screw is within +- .01mm (whole travel).
  4. Spindle oil cooling system-- The spindle oil cooling system maintains a constant temperature to extend spindle life and ensure high efficiency and high precision machining.
  5. High speed and high accuracy spindle— The spindle runs on super precision (angular contact) ball bearings to ward off vibration from heavy cut loads. It is suitable for precision process and high speed milling.
  6. Milling head is connected to an external high capacity coolant system which protects against heat distortion during heavy cutting at high speeds.
  7. Automatic lubrication system- oil lubrication system can automatically measure and provide oil accurately to the oil distributor, precision ball screw and slide guide.
  8. Fully enclosed cover- A fully enclosed protective shield that conforms to environmental requirements and CE standards. This provides a more comfortable operating environment.
  9. To ensure optimal quality and performance, the machine is inspected and tested before leaving the factory. This includes a strict quality inspection, laser detection, Ball Bar test, and actual cutting performance tests (Heavy duty milling, 3D semi-circular cutting mold test, 45 degrees parallel to the 2D circular milling and cutting)

 

  • FEATURES
  1. With C3 grade large diameter (XYZ: Ø32) high precision ball screws to ensure the highest accuracy and durability. Three-axis motor side 4 bearing, but also to strengthen the stability and accuracy of the machine in the rapid displacement
  2. The machine uses unique end of the structural design. The trailing portion of the split bearing adjust the tail accuracy efficiency,and improve assembly efficiency and quality of machine.
  3. The machine is equipped with a protection device can absorb the impact of vibration, to ensure accuracy.
  4. Line rail uses Taiwan HIWIN linear ball rails, and the Z-axis uses ultra-load roller linear slide. After the three-axis complete the design and collocation,the three-axis rapid traverse speeds up to 36m/min.
  5. Built with heavy cylinder: to ensure that the Z-axis fast-moving, will not produce the shaking to ensure accuracy.
    Reduce the screw weight, reduce fever, improve accuracy and service life. But also reduce the load on the servo motor, lower power consumption and heat.
  6. Z-axis, the VL-6i strengthen configured as four slider support, greatly improving the stability of the head drive.
  7. The adjective head structure with good rigidity and reasonable weight.

 

  • ACCESSORIES

 

Standard Accessories

  • Spindle coolant system
  • Chip flush
  • High pressure water & air gun
  • Leveling screws with blocks
  • Tool box and tool
  • Air blast through spindle
  • Work lamp
  • Three color light
  • Auto power off
  • Auto lubrication system
  • Rigid tapping
  • RS232 interface
  • CF card interface
  • Remote manual pulse generator
  • Heat exchanger for control cabinet
  • Operation Manuel
  • Full splash guard
  • BT-40 belt type spindle 10000rpm

Opertional Accessories

  • Tool lenght measurement system
  • Around spindle cutting coolant unit
  • Coolant through spindle (18Bar/ 30Bar/ 50Bar)
  • Arm Type ATC (24T)
  • Geneva Type ATC (16T)
  • 4th Axis(Ø125/170/210/255)
  • Three axis optical scale (HEIDENHAIN)
  • Air conditioner
  • Column raised: 150mm / 200mm / 250mm

Optional:spindle

  • BT-40 direct drive 12000/15000rpm 
  • BT-30 built-in 24000/30000rpm

 

 

  • SPECIFICATIONS

Specifications \ Models

VL-6i (E)

VL-6i (P)

Travel

X - Axis Travel

600mm(23.6")

Y - Axis Travel

450mm(17.7")

Z - Axis Travel

500mm(15.7")

Spindle Nose To Table

130 - 630mm  (5.1"-20.8")

Spindle Center To Z - Rail

500mm (19.7")

Table

Table Size

750mm*420mm(29.5"*16.54")

T - Slot  (number*width*pitch

3*14mm*100mm (3*0.55"*3.9")

Maximum Table Load

400kg (880lb)

Spindle

Spindle Taper

BT-40

Spindle RPM

10000RPM

Type Of Driving

Belt Type

Feed Rate

X. Y Axis Rapid Feed Rate

36m/min 

Z Axis Rapid Feed Rate

36m/min

X. Y. Z Max.Cutting Feed Rate

10m/min    (393.7"/min)

Automatic tool changer (ATC)

Arm Type (Tool to Tool)

24T(3sec)

Motors

 

Mitsubishi

Fanuc 

Spindle Motor

5.5/7.5kw

7.5/11kw

X. Y Axis Servo Motor

1.5kw

1.8kw

Z Axis Servo Motor

3.0kw BS

3.0kw BS

Machine Accuracy

Positioning Accuracy (JIS)

+ /- 0.005mm/300mm

Repeat Poitioning Accuracy (JIS)

+ /- 0.003mm

Other

Approximate Weight

4200kgs

Floor Space Measurement

2100*2800*2330mm

 

We could not find any corresponding parameters, please add them to the properties table
Previous

Related Products

 TP915
TP915
1. Servo motor drive, with sufficient power, quick cutting speed, high production efficiency. 2. Flexible tapping system with tap torque forces protect,  taps will never be damaged 3. with waterproof, oil-proof function 4. fast change chuck, ensure continuous tapping
 AUT-8513
AUT-8513
 YDZ30
YDZ30
 YDZ20
YDZ20
 LG-120
LG-120
 LG-250
LG-250
  JT6532
JT6532
 JT4508
JT4508
 SWJ-20
SWJ-20

Contact

Add:1181 n.tustin ave.anaheim,california,92807,usa
Kevin wang  Marketing manger
Cell:
+861 831 256 8991
Office:+861 657 208 3105
E-mail:kevin@icuttoolscorp.com
Web: http://www.icuttoolscorp.cn/